心情论坛 - 心情网

标题: [办公]先进的电脑办公桌 Model 500 [打印本页]

作者: Star 时间: 2007-5-30 23:43 标题: [办公]先进的电脑办公桌 Model 500

浏览网站时看到国外的办公桌设计公司的产品，觉得很新奇，和大家分享下。
[attach]26485[/attach][attach]26486[/attach]

产品型号：Model 500
产品特点：站立、坐着、躺着都可以使用
适用人群：程序员、CAD 工作者、图表设计师或特别需要几个小时都要在电脑旁工作的（本人觉得躺着的特点，特别适合残疾人）

产品图示及说明

[attach]26484[/attach]
1. Work Surface: durable 1.5" thick medium density board with black laminate and rubber-molded edge.
2. Keyboard tray and arm: Spring loaded sleeves adjust in width to accommodate a variety of keyboards. Mechanism has two pivot points, allowing the tray to tilt through 90 degrees and provide a range of positions for use in a reclined mode.
3. Power strip. Has 6 grounded outlets with a 12 foot grounded cord and plug. Strip can be mounted on either side.
4. Motorized legs: raise and lower table to and up to 400 lbs. of equipment from 31 to 50 degrees with the push of a button, for use in sit, stand, or recline position with minimal effort.
5. 5" Casters: Heavy-duty, ball bearing casters with elastomeric wheels to provide smooth movement. Front two casters are locking.
6. Keypad: provides push button controls of the motorized legs and monitor tilt platform.
7. Motorized monitor tilt platform: tilts monitors weighing up to 150 lbs. from 0 to 55 degrees for comfortable use in many positions including supine work. Also accommodates LCD monitors.
8. Cord management grommets: two 3" diameter holes with plastic grommets provide power strip access below the tabletop.
9. Powder-Coated Steel Tube: The 2" diameter steel tube frame eliminates a need for cross members beneath the work surface. They provide maximum clearance for recliners, beds and wheelchairs. Durable finish resists scratching.
10. Zero Gravity Recliner also available. Call.

[attach]26487[/attach][attach]26488[/attach]
[attach]26489[/attach][attach]26490[/attach]
[attach]26491[/attach]

附件: Ergoquest500newD.gif (2007-5-30 23:43, 37.86 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26484

附件: Ergoquestnew500.jpg (2007-5-30 23:43, 19.78 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26485

附件: ergoquestnew5002.jpg (2007-5-30 23:43, 30.65 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26486

附件: ErgoQuest500_1.jpg (2007-5-30 23:43, 9.74 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26487

附件: ErgoQuest500_2.jpg (2007-5-30 23:43, 9.6 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26488

附件: ErgoQuest500_3.jpg (2007-5-30 23:43, 12.43 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26489

附件: ErgoQuest500_4.jpg (2007-5-30 23:43, 9.7 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26490

附件: ErgoQuest500_5.jpg (2007-5-30 23:43, 9.63 K) / 该附件被下载次数 0
http://bbs.exinqing.net/attachment.php?aid=26491

作者: 昭雪儿 时间: 2007-6-11 11:00

嘻嘻强啊~~~~~多功能的不错

作者: 孤狐 时间: 2007-6-30 00:33

太棒了，这样就不会颈椎痛了。

作者: allywawa 时间: 2007-6-30 01:43

这得多少银子啊 ~~

作者: lovever 时间: 2007-6-30 08:54

怀疑这个东西的真实性。第一，看了半天没看到机箱放在哪里。第二，躺着的话，手岂不是要一直按着鼠标，看那角度，只怕一松手，鼠标就会滑落。第三，CRT显示器和液晶显示器，真的能如图那样固定吗？真怕掉下来。

[ 本帖最后由 lovever 于 2007-6-30 08:56 编辑 ]

欢迎光临心情论坛 (http://bbs.exinqing.net/)